Tensar+ Design Software

Stabilizing a subgrade, passing a proof roll, or designing an unpaved road is easier than ever with Tensar+ software.

Our award-winning, free cloud-based software allows engineers, contractors and owners to design with geogrid in a variety of applications, including pavements, crane pads, soft soil stabilization, unpaved roads, and marine scour protection.

Start Designing

Find the Right Design for Your Project

Tensar+ allows you to calculate the total value of each design alternative, including conventional construction. Tensar+ incorporates the benefits of Tensar geogrids into accepted design methodologies, based on rigorous full-scale testing and validation by third-party experts.

With Tensar+ Software, you can:

CheckmarkEvaluate and optimize performance of roadways and other site works over a variety of subgrade conditions

CheckmarkGenerate custom specifications and reports for your design

CheckmarkShare your design with colleagues directly from the software platform for improved collaboration

CheckmarkDetermine initial and lifecycle cost savings, time savings, and sustainability metrics

CheckmarkEasily compare design alternatives, including geotextiles, geogrids and conventional construction

CheckmarkAccess product data, research reports and training resources

CheckmarkConnect through any major mobile platform or browser and work online or offline with a single workspace

CheckmarkPrint high quality visuals of your design and expected savings to share with clients

Asphalt Pavement

Determine the most cost effective pavement section to achieve the design ESAL value using the AASHTO 93 method. Further analyze the pavement section to optimize based on performance, lifecycle cost, time and carbon savings.

Unpaved Road & Subgrade Stabilization

A new method for the design of unpaved roads derived from assessment of the true behavior of the mechanically stabilized unbound aggregate layer when subjected to dynamic stresses from vehicular loading.

Pass a Proof Roll

Estimate the unpaved section thickness needed to pass a proof roll, based on typical vehicles and allowable deformation. Determine improved resilient modulus of stabilized section for input into pavement design.

Heavy Haul Road

Unpaved road design for vehicles with heavy axle loads, special tire configurations, complex traffic patterns, and a high amount of traffic

Working Platform

Bearing capacity design method for design of safe working platforms over soft soils to support temporary heavy equipment such as cranes, piling rigs and other stationary equipment.

Sub-Ballast Stabilization

Analysis and comparison of unstabilized sub-ballast to geogrid stabilized sub-ballast sections over soft soils. Calculate cost savings based on the reduced sub-ballast thickness using InterAx geogrid.

Liquefaction Mitigation

Design of geogrid stabilized gravel raft under shallow foundation of lightly loaded structures to improve seismic performance by increasing bearing support, reducing the potential of total and differential settlements and soil ejecta.

Scour Protection

Analyze a channel scour project by determining the applied hydrodynamic shear stress and the design shear stress using the Triton Marine Mattress system. Determine if the solution is appropriate by comparing the target factor of safety (FOS) to the design FOS.

Shallow Foundation

Design with geogrid to support shallow footings over soft soil, calculate bearing capacity and settlement.

Resources

Tensar+ Software Now Offers Railway Design Module

2:28 Duration

Mechanical Ballast & Sub-Ballast Stabilization & the Tensar+ Software Rail Module

.5 PDH credits

Tensar+ Long Tutorial

This long tutorial introduces you to some of the features of Tensar+, the award-winning, free design software for construction professionals to design...
4:56 Duration

Tensar+ Short Tutorial

This short tutorial provides an overview of how to use Tensar+, Tensars award-winning, free design software.
4:00 Duration

New Design Methodology for Unpaved Roads

One of the most common challenges in sitework is the efficient construction of unpaved roads, particularly over soft soils. The design of these roads...
1 PDH credits

Tensar+ Design Software Wins Constructech Top Product Award

Helping engineers, contractors and owners design and build with confidence is at the core of all Tensar solutions. For years, civil construction...
January 10 2022

Working Platform Design: Using Tensar's Bearing Capacity Design Method and Tensar+ Software

Working platform design over soft soils for heavy equipment such as cranes, drill rigs and other stationary equipment can be extremely challenging....
1 PDH credits
View All

Ready to start designing?

Sign up now!

Tensar+ software supports all modern browsers: Firefox, Chrome, Safari, Opera, Edge 10+ and many others. For optimal security and experience, it does not support Internet Explorer or older versions of Edge.

Tensar+ App Logo Tensar+

Design with confidence, from anywhere.

  • Design & evaluate pavement and gravel sections, working platforms, sub-ballast sections & more
  • Easily compare alternative materials
  • Determine initial and lifecycle cost savings, time savings, and sustainability metrics
  • High-level summary of the design alternatives for project stakeholders
  • Sharing features that aid collaboration

Start Designing Now

Stacked Image 0