Tensar International Corporation delivers engineered systems that are a combination of technology, engineering, design, and products. Unique in their quality, consistency, and durability, these products are composed of materials resistant to physical deterioration and loss of strength caused by aggressive chemical environments.

Tensar® TriAx™ Geogrids
Tensar TriAx Geogrid is manufactured from a punched polypropylene sheet, oriented in multiple, equilateral directions to form a triangular aperture, delivering high radial stiffness throughout the full 360 degrees. This feature yields a more efficient product that delivers optimal in-service stress transfer from the aggregate to the reinforcement.
TX140 and TX160 Material Property Data Sheet
BX/TX Installation Guide

Tensar® Uniaxial (UX) Geogrids
Tensar UX Geogrids are manufactured using select grades of high-density polyethylene (HDPE) resins that resist elongation (creep) when subjected to high loads for long periods of time. These geogrids carry large tensile loads applied in one direction (along the roll), and their open aperture structure interlocks with natural fill materials.
UXHS MPDS/Geogrid Specifications
UXMSE MPDS/Geogrid Specifications

Made from the same high quality polymer as UX Geogrids, LH800 Geogrid is designed to easily and efficiently reinforce soil slopes (RSS) and low-height segmental block retaining wall (SRWs). It is available in multiple widths, which, when combined with the design strength oriented across the roll, make for quick deployment of the geogrid reinforcement.
LH800 MPDS/Geogrid Specifications

Tensar® Biaxial (BX) Geogrids
Tensar BX Geogrids are created using select grades of polypropylene or copolymers that resist high, short-term dynamic loads or moderate loads over longer time periods. These products carry loads applied in any direction in the plane of the geogrid.
Biaxial Geogrid Specifications
BX/TX Installation Guide

GlasGrid® Pavement Reinforcement Interlayer System
New to the Tensar Family, GlasGrid products capitalize on the tenacious strength and stiffness of fiberglass, together with its open apertures, to make it the leading interlayer system for pavement overlay design.
GlasGrid MPDS/Geogrid Specifications

Similar to GlasGrid products, GlasPave Waterpoofing Paving Mats utilize a fiberglass matrix that provides significantly greater tensile strength at low strain to extend pavement life by delaying reflective cracking and acting as an effective moisture barrier.
GlasPave MPDS/Geosynthetic Specifications

Endurablend™ Systems
Recently acquired by Tensar International Corporation, the Endurablend™ System is an advanced polymer cement slurry surfacing (PCSS) system that extends the service life of asphalt and concrete pavement surfaces.
Endurablend Brochure

Mesa® Segmental Concrete Blocks
Mesa segmental concrete blocks, which are designed specifically to interact with Tensar Geogrids, and create a positive, mechanical, end-bearing connection, have compressive strength that exceeds AASHTO standards (>4000 psi).

Triton® Coastal & Waterway Systems
The Triton Systems are typically used for shoreline protection and erosion control. They are a family of composite marine systems used for a broad range of coastal and waterway construction.
Triton MPDS/Geogrid Specifications

Mining Systems
Tensar Mining Systems are used in underground coal and mineral mines, together with hard rock tunnels. They offer a wide range of cost-saving solutions that lower the overall operating costs of the mine site.
Mining MPDS/Geogrid Specifications

To view PDF files, download Adobe Acrobat Reader