Please enter your user name and password below:
Register today to gain access to online tools and downloads including:
Please select a country.
Please select a Language.
Tensar® Uniaxial (UX) Geogrids are manufactured from select grades of high-density polyethylene (HDPE) resins that are highly oriented and resist elongation (creep) when subjected to heavy loads for long periods of time. These geogrids are also highly resistant to installation damage as well as long-term chemical or biological degradation. In fact, Tensar UX Geogrids have shown no degradation in soils with pH levels measuring as high as 12 and can be used in both dry and wet environments. Given the inert properties of HDPE resins, they can be installed with a variety of backfill materials, including on-site soils and recycled concrete.
Tensar UX Geogrids can carry high tensile loads applied in one direction (along the roll). Their open aperture structure interlocks with fill material to provide superior load transfer from soil to geogrid. These geogrids are manufactured by punching and drawing a homogenous polymer sheet to create a uniform product that does not require weaving, coating or welding to maintain structural integrity. This results in superior junction strength, which allows durable connection to other rolls of installed geogrid or to facing components.
Easy to handle and install, Tensar UX Geogrids are used for high-strength soil reinforcement in wall and slope applications; more than 100 million square feet of grade separation structures in service today are reinforced with them.
Made from the same HDPE material as Tensar UX Geogrids, Tensar® LH800 Geogrid is designed to provide structural integrity easily and efficiently to reinforced soil slope (RSS) and low-height segmental block retaining wall (SRW) structures. Unlike most geogrid products that are installed perpendicular to the wall or slope face, Tensar LH800 Geogrid is rolled out parallel to the face, along the direction of roll strength. This maximizes geogrid coverage while minimizing the amount of sizing, shaping and cutting required, resulting in quicker installation.
Tensar International is always pleased to receive your requests and inquiries and we will try to respond as quickly as possible.
Login or register to see our complete documents library including specifications (MPDS)...
Tensar International Corporation, Inc., headquartered in Atlanta, Georgia, is a full-service provider of specialty products and...
Tensar® ADD3® Capacity Improvement Systems are designed to maximize the capacity of landfills...
Used in nearly every sector, retaining walls adapt to challenging site conditions of every kind..
Getting the Most Out of (and Into) Engineered Landfills..
Mesa® Systems Stack Up to the Challenge...
A lower cost alternative to cast-in-place and other concrete retaining walls...
2500 Northwinds Parkway,
(770) 344-2090 International
Tensar International Corporation, Inc., headquartered in Atlanta, Georgia, is a full-service provider of specialty products and engineering services.
See all of the latest Tensar news and events here....